Home › Forums › Products › Stompboxes › Naming Preset, Great feature, but . .
- This topic is empty.
-
AuthorPosts
-
-
December 8, 2010 at 1:43 pm #107457RelicBertMember
Naming presets, what a great feature!
Some remarks:
1 – It would be nice if there were some more charakters available, like: space, asterix, dash, etc.
2 – Most charakters are three dots wide. Only "W"is five dots wide. Try entering SHADOWS,
The last S is very hard to enter.
3 – Copy / Paste on complete names would be a very nice feature . . .
A Happy TimeFactor user:
Bert -
December 16, 2010 at 12:39 am #121212
You can have 1 and 2.
Not sure where you would Copy/Paste to.
-
December 19, 2010 at 4:11 pm #121229hywelgMember
Great, number 1 would be very much appreciated.
Along with scrolling names in bank mode so that if you have eg. Bank4:1SlapBk01 and Bank4:2SlapBk02 pre programmed (the last part of the name is not showing after the first scroll through) you will always be reminded which you've got without having to change bank and back again. Set it to scroll every 3-4 seconds will be great.
-
December 20, 2010 at 6:27 pm #132386
We initially had more scrolling, but found it to be very annoying. But, we will be guided by our people …
-
December 20, 2010 at 8:07 pm #132388timothyhillMember
If you guys are considering adding continous scrolling to the preset names display, please also consider adding a way to turn this on or off. While I can see why some users would find scrolling helpful, I can also see your original point of it being an annoyance. If there was a way to turn this on or off, it could satisfy both camps. Maybe under the System>>Global>>Utility menu like the LFO display on the MF?
-
December 20, 2010 at 8:39 pm #132389RelicBertMember
+1
-
December 21, 2010 at 12:22 am #132390zikamuricpeMember
+1
-
December 21, 2010 at 5:32 am #1323927stringlespaulMember
Yes more scrolling would be nice!!
-
January 2, 2011 at 3:20 am #121292kenficaraMember
You do have a space, though it's not intuitive. After you type the first letter of the second word, press the left button to back up to it, then press and hold the right button to insert a character, then press the right button to pass over it. You'll have a space where you inserted the character.
-
-
AuthorPosts
- You must be logged in to reply to this topic.