[sdd17]

Reporting back, after hours of trouble shooting with Tyler, my final attempt to resolve the matter seems to have corrected the issue!

Re-initializing the unit brought me back to being able to see the emote and achieve a solid network light. I will re-check everything tomorrow Sunday the 6th and also check for audio and confirm my findings!

Stevie D

[sdd17]

I never tried the simple panner algo!!

[sdd17]

actually my photos are to big.

If you give me your email i will send them to you.

sdd17@aol.com

[sdd17]

Got it to work with algo 3327!!!

I attached some photos!

ty

Stevie D

[sdd17]

joecozzi wrote:

Hi Stevie, Software 1.3.0(10) (eab755234) is the firmware on your H9000R. The latest version of Emote is 1.3.0[12], which you can download from the Eventide website, if you haven’t already done so. On a Mac, for example, you can control+click on the application icon and choose “Get Info” to see what version you’re on.

Some indication of how you’re using your H9000R would be helpful. Are you routing signal directly from an audio track or are you using buses and inserts? I checked 3311 and it’s working fine on my end. In my setup, for example, I have a synth on an audio track and I’m busing signal from it to an Auxiliary track whose input is set to the same bus. The H9000 appears as an insert on that aux track. I’m able to hear the algorithm auto-panning correcting. Please check to make sure you’re sending audio to the appropriate I/O from within your DAW. A good tool to use to make sure signal is being routed properly are the meters on the PARAMETERS tab on Emote. You’ll be able to tell if the H9000R is receiving signal from Cubase as well as sending out signal from the effect back into Cubase. Let me know what problems you run into.

 

I am running the unit fully analog and returning on a console!

So 4 mono sends multed to the analog stereo inputs on the h9000r and 4 separate stereo outs returning to my console!

By the way I pulled up some other stereo effects like a ping pong delay and the stereo movement was working!

[sdd17]

I’m using Cubase 11 on a mac/mojave

[sdd17]

Hello,

 

Software is 1.3.0(10) (eab755234) Not sure if that’s the emote or the h9000r

I am a little unsure how to check which version is emote and which is h9000r?

The Algo’s are 3329 and 3311

thank you vm

Stevie D

[sdd17]

I have an H9000R so I cant update from the from panel as far as I know!!

Thanks for the reply

[sdd17]

Hey guys,

 

happy to be in the H9000 club!!

 

Here is what I got at the moment.

 

The emote is crashing Cubase. I am not sure which version emote should be installed. I originally installed Version: 1.1.5[2] but I was having issues (I think connectivity issues) so I went and installed

Version: 1.2.2[4]h9000 for mac and it seemed to be working fine until tonight when Cubase started crashing when opening the session that had an instance of emote happening in it.

So I proceeded to see if there was an update for emote and found 1.2.4(7)(0021ed6e1) and I installed it. Now the emote will not communicate with the h9000r and I can’t seem to uninstall that revision to go back to 1.1.5(2). Everytime I uninstall all the emote components then reinstall 1.1.5(2) emote still shows up as 1.2.4(7). I did hook up an ethernet cable and word clock today.

 

Anyway at the moment I dont have the unit operating.

 

Any suggestions?

 

Thanks vm,

 

Stephen DeAcutis

[Author]

Posts